- CRAWLER
- Crawler - Αξεσουάρ
- DASH
- Lexan
- Καλώδια & Βύσματα
- ΠΡΟΣΦΟΡΕΣ
- Αυτοκίνητα
- Αεροπλάνα
- Ελικόπτερα
- Σκάφη - Πλοία
- Κινητήρες Nitro
- Καύσιμα
- Μπουζόπιπες - Μπουζιά
- Σέρβο
- Μίζες - Μιζόκουτα
- Θερμόμετρα
- Τηλεκατευθύνσεις
- Ανταλλακτικά
- Σιλικόνες - Λάδια - Καθαριστικά
- Drones - Multirotors
- Εργαλεία
- Speed Controls (ESC)
- Μπαταρίες
- Φορτιστές
- Ηλεκτρικά Μοτέρ
- Κόλλες - Χρώματα - Spray
- Μπλούζες - Καπέλα - Διαφημιστικά
- Εργαλειοθήκες - Βάσεις - Τσάντες Μοντέλων
- Αυτοκόλλητα
Το καλάθι είναι άδειο!
Maverick Phantom XT 1:10 RTR Truggy GREEN
The Maverick range is developed by HPI to meet the needs of novice
pilots who want to have a vehicle, resistant, easy to pilot and with an
attractive look.
All these kits have spare parts, optional parts.
The Phantom XT comes with a charcoal electric motor with high torque the
MM-550. The 4×4 transmission uses very strong steel gimbals. This model
is equipped with a waterproof drive, a water resistant servo and with a
gear protection cover.
Everything you need to get your Phantom XT up and running is included
in the box with a 7.2V 1800mAh Nimh battery and a super handy
Delta-Peak USB charger (be careful except 4 batteries for the
transmitter)! This means you can charge your RC car battery with
virtually any cell phone wall charger!
To drive the Phantom XT, all you need to do is take the throttle with
your left hand, place your left index finger on the trigger, then put
your right hand on the steering wheel – it’s as natural as driving a
real car! Turn the wheel to go left and right, and gently squeeze the
trigger with your left index finger to move forward. To stop the car,
gently pull the trigger forward, then release and push again to
reverse. It only takes a few seconds to get used to this easy operation,
and soon you will be able to race with your friends!
Main features:
– 4WD Monster Truck
– 550 brush electric motor with high torque
– Waterproof dimmer and water resistant servo
– Maverick 2.4Ghz radio with waterproof receiver
– USB charger included (2A input recommended)
– 7.2V 1800mAh NiMh battery
– Gear cover to keep debris away from the gear
– Front and differentials rear
– Entirely on ball bearings
– Independent double wishbone suspension
– Oil shock absorbers
– Two-point
steering system
– Independent servo saver – Painted and decorated pre-cut bodywork
– Molded tub frame with optimized weight distribution
Included:
– Ni-battery Mh 7.2V 1800mAh
– USB battery charger
Specifications:
Length: 415mm
Width: 325mm
Height: 175mm
Wheelbase: 298mm
Weight: 1.75kg
Items needed:
– 4 x AA batteries
( ΣΤΗ ΣΥΣΚΕΥΑΣΙΑ ΔΕΝ ΠΕΡΙΛΑΜΒΑΝΕΤΑΙ Η ΜΠΑΤΑΡΙΑ ΚΑΙ Ο ΦΟΡΤΙΣΤΗΣ )